LX9101 BLUETOOTH/RF WIRELESS SWITCH DIMMING PANEL

LED Logical LX9101 is a battery-operated, self-powered wall switch that communicates with wireless RF receivers, designed for the dimming and switching of LED luminaires and lighting without the need for cabling. Its versatility and ease of installation make it an ideal solution for retrofit projects or situations with wiring challenges. This innovative switch ensures flexible lighting control, enhancing convenience and functionality in both residential and commercial settings.

OVERVIEW

Input Power Battery 3V
Battery Specification 1 x CR2450 Battery
Number of Zones Single Zone
Dimming Protocol On/Off & Touch DImmable
Mounting Wall/Surface Mounting

COMPATIBLE RF RECEIVER

(AVAILABLE SEPARATELY)
LX2240 LX2240 240V Phase Dimmer
LX1120 (Operates One Zone) LX1120 12-36VDC LED Interface
LX1110 LX1110 12-36VDC LED Interface

SYSTEM AND NETWORK

Network Type Mesh Network
Wireless Protocol RF Wireless & Bluetooth
Radio Frequency 2.4GHz
Max No. Devices Per Network 128
Typical Device Range Up to 30mtrs Between Devices

PHYSICAL SPECIFICATIONS

Dimensions 80x80x13.6mm
Working Temperature -10C – +40C
Rec. Relative humidity 8% to 80%
RF Frequency 2.4GHz
IP Rating IP20

 

Step 1:
Complete correct wiring the RF+Bluetooth receiver according to wiring diagram (please refer to the instruction of RF+Bluetooth receiver that you would like to pair with.)

Step 2: Click the “Prog. Key” or “Reset” button on RF+Bluetooth receiver to set it into pairing mode

Step 3:
Click any button of the remote (LED load correctly connected with the receiver will flicker once meaning the receiver is paired with the remote successfully.

Note: one receiver can be paired with max 8 remote controls.

Product Data

Output RF+Bluetooth
Operation Frequency 2.4GHz
Power Supply 3V(1xCR2450 battery)
Operating temperature 0-40°C
Relative humidity 8% to 80%
Dimensions 80x80x13.6mm

 

• RF+Bluetooth DIM wall mounted remote control
• Enables to control 1 zone of receivers