DR803 SLIMLINE CONSTANT CURRENT LED DRIVER

LED Logical DR803 series is a range high-performance LED drivers designed with a constant current configuration for optimal LED operation. It features multiple dimming options, including DALI, providing unparalleled control over lighting intensity and ambiance. Suitable for a wide range of applications, the DR803 ensures energy efficiency and compatibility with advanced lighting control systems,
making it a versatile choice for professional lighting solutions.

OVERVIEW

Input Voltage: 200-240VAC
Max Power Options 30W / 40W / 50W / 60W / 70W
Dimming Protocols Non-Dimmable / DALI / 1-10V
Output Channels Single Channel Output

INPUT VOLTAGE RANGE

Rated Voltage 200-240VAC
Operating Configuration Constant Current
Power Factor PF>0.95 @ 230VAC/full load

OUTPUT SPECIFICATIONS

Output Current Selectable up to 2000mA
DC Output Voltage 3-54VDC CC
LED Driver Classification: Constant Current
Max Power Output 70W

CONTROL CHARACTERISTICS

Output Protocol PWM
Dimming Range 0-100%
Protocol Non-Dimmable / DALI or 1-10V

BUILT-IN PROTECTION

Short Circuit Short Circuit Auto Protected
Over Current DC Over Voltage Protection*
LED driver will auto recover after fault rectified (Sustained DC drive over-voltage will cause permanent damage)

PHYSICAL SPECIFICATIONS

Max Case Temperature 70C (Tc)
Storage Temperature Range: -20C – +60C
Withstand Voltage Max 250VAC
IP Rating IP20
Storage Temperature Range -20C – +60C
Connection Screw Terminal
IP Rating IP20

DIMENSIONS & CARTON DATA

 

PACKING Weight/box Carton size Weight/pcs Product size Product size
48PCS/CTN 9.6KG/CTN L410*W295*H200mm 0.168Kg L245*W30.2*H20.6mm DR803-30-XXXX
40PCS/CTN 9.4KG/CTN L415*W330*H190mm 0.205 Kg L285*W30.2*H20.6mm DR803-40-XXXX
40PCS/CTN 10.5KG/CTN L415*W330*H190mm 0.230 Kg L285*W30.2*H20.6mm DR803-50-XXXX
35PCS/CTN 12.1KG/CTN L415*W330*H190mm 0.305 Kg L335*W30.2*H20.6mm DR803-60-XXXX
35PCS/CTN 14KG/CTN L440*W375*H222mm 0.355 Kg L355*W36.3*H23mm DR803-70-XXXX

 

  • FEATURES

  1. 180-264VAC input
  2. Built in active PFC function,high PF,low THD
  3. Stanby power consumption <0.5W to turn off dimmable port.
  4. Optional dimming methods
  5. Constant current mode output with mulitiple levels selectable by DIP.switch
  6. Supporting multi-power supplys synchronous dimming
  7. Cooling by free air convecationconnected in parallel
  8. Suitable for indoor LED lighting applications
  9. Built in DALI dimming function

  • APPLICATION

  1. LED indoor lighting
  2. LED office lighting
  3. LED architectural lighting
  4. LED panel lamp lighting

 

  • SPECIFICATION
MODEL 0750AD 1000AD 0750BD 1250AD 1000BD
OUTPUT DC CURRENT 0.3-0.75A 0.55-1.0A 0.3-0.75A 0.8-1.25A 0.55-1.0A
DC VOLTAGE RANGE 3-42V 3-42V 3-54V 3-42V 3-54V
RATED POWER 30W Max. 40W Max 40W Max. 50W Max. 50W Max.
Voltage RIPPLE & NOICE Note.2 ≤200mV(Vpp) ≤300mV(Vpp) ≤350mV(Vpp) ≤300mV(Vpp) ≤350mV(Vpp)
Current RIPPLE & NOICE Note.2 ≤20mA(RMS) ≤30mA(RMS) ≤ ≤20mA(RMS) ≤50mA(RMS) ≤50mA(RMS)
CONSTSNT CURRENT
ADJ. RANGE		 DIP S.W DIP S.W DIP S.W DIP S.W DIP S.W
CONSTANT CURRENT
ACCURACY		 ±5% ±5% ±5% ±5% ±5%
LINE REGULATION ±5% ±5% ±5% ±5% ±5%
LOAD REGULATION ±5% ±5% ±5% ±5% ±5%
External PWM interface N A
INPUT RATED VOLTAGE 200-240VAC,DC200-240V
AC VOLTAGE RANGE 180-264VAC
DC VOLTAGE RANGE 180-264VDC
FREQUENCY RANGE 47-63Hz
POWER FACTOR PF>0.95 @ 230VAC/full load,PF>0.90 @ 230VAC/>50% load
TOTAL HARMONIC
DISTORTION		 THD<10% @ 230VAC/full load,THD<15% @ 230VAC/>50% load
EFFICIENCY (Typ.) 87% 89% 90% 90% 90%
STANDBY POWER Note.3 <0.5W @ 230Vac
INPUT CURRENT <0.25A @ 200Vac <0.3A @ 200Vac <0.35A @ 200Vac
INRUSH CURRENT
(Cold start 230Vac)		 <30A,＜0.09A S(Twidth=
100us measured at 50% Ipeak)		 <30A,＜0.12A S(Twidth=130us measured at 50% Ipeak) <30A,＜0.12A S(Twidth=130us measured at 50% Ipeak)
Max. No. of PSUs on 16A circuit breaker(230VAC) 40 units( type B);
48units( type C).		 37 units( type B);
45units( type C).		 <32 units( type B);
37units( type C).
TURN ON DELAY <0.5S @ 230Vac
PROTECTION SHOTR CIRCUIT Hiccup,recovers automatically after fult condition is removed
OVER VOLTAGE 50V 50V 63V 50V 63V
OVER TEMPERATURE Constant current limiting,recovers automatically after fult condition is removed
ENVIROHMENT OPERATION
TEMPERATURE		 ’20—60℃’
OPERATION HUMIDITY 10—90% RH non-condensing
STORAGR TEMPERATURE/HUMIDITY ‘-40—80℃’ 5—95% RH
IP CLASS IP20
VIBRATION 10~500Hz,5G 12min./1cycle,period for 72min. each along X,Y,Z axes
Tc Tc=90℃(Ta=60℃)
MTBF 50000H min.,MIL-HDBK-217F(45℃)
EMC EMC EMISSON Compliance to EN61000-4-2,3,4,5,6,8,1EN61547,surge：L-N 2.5KV,L/N-PE 2.5KV
EMC IMMUNITY Note.4 Compliance to EN61000-4-2,3,4,5,6,8,1EN61547,surge：L-N 2.5KV,L/N-PE 2.5KV
SAFETY SAFETY STANDARDS EN61347-1/2-13,GB19510.1/14 EN62384
DALI STANDARDS IEC62386-101,102,207
CERTIFICATE Conform to ENEC CE,SAA,RCM
WITHSTAND VOLTAGE I/P-O/P:3750VAC,I/P-FG:1750VAC,O/P-FG:500VAC
LEAKAGE CURRENT <0.75mA @ 230Vac
Isolation resistance I/P-O/P,I/P-FG,O/P-FG:100MΩ/500Vdc/25℃/70% RH
PACKAGE DIMENSION L245*W30.2*H20.6mm L285*W30.2*H20.6mm L285*W30.2*H20.6mm
Carton L410*W295*H200mm L415*W330*H190mm L415*W330*H190mm
SINGLE WEIGHT 0.168Kg 0.205 Kg 0.230 Kg
PACKING 48PCS/CTN 40PCS/CTN 40PCS/CTN
NET WEIGHT 8.1KG/CTN 8.2KG/CTN 9.3KG/CTN
GROSS WEIGHT 9.6KG/CTN 9.4KG/CTN 10.5KG/CTN
Environmental protection RoHS
INPUT CONNECTION PCB connector/3.5mm/6PIN/orange*2+gray*2/0.75mm-1.5mm^2
OUTPUT CONNECTION PCB connector/3.5mm/4PIN/black+green+black+red/0.5-1.5mm^2
NOTE 1.All parameter are measured at 230VAC input,rated load and 25℃ of ambient temperature
2.Ripple & Noise are measured at 20MHz of bandwith by using a 12″ twised pair-wire terminated with a 0.1uF & 47uF paralled capacitor
3.Stand-by power consumption is measured at dimmable off condition.
4.The power supply is considers as a compent that wil be operated in combination with final equipment.Since EMC performance will be affected by the complete installation the final equipment mancfactures must re-quality EMC directive on the complete installation again.
5.

 

 

  • SPECIFICATION
MODEL 1650AD 1300BD 2000AD B1500BD
OUTPUT DC CURRENT 0.3-0.75A 0.55-1.0A 1.3-2.0A 1.05-1.5A
DC VOLTAGE RANGE 3-42V 3-42V 3-42V 3-54V
RATED POWER 60W Max 60W Max. 70.3W Max. 70.2W Max
Voltage RIPPLE & NOICE Note.2 ≤350mV(Vpp) ≤350mV(Vpp) ≤300mV(Vpp) ≤350mV(Vpp)
Current RIPPLE & NOICE Note.2 ≤50mA(RMS) ≤50mA(RMS) ≤80mA(RMS) ≤80mA(RMS)
CONSTSNT CURRENT
ADJ. RANGE		 DIP S.W DIP S.W DIP S.W DIP S.W
CONSTANT CURRENT
ACCURACY		 ±5% ±5% ±5% ±5%
LINE REGULATION ±5% ±5% ±5% ±5%
LOAD REGULATION ±5% ±5% ±5% ±5%
External PWM interface N A
INPUT RATED VOLTAGE 200-240VAC,DC200-240V
AC VOLTAGE RANGE 180-264VAC
DC VOLTAGE RANGE 180-264VDC
FREQUENCY RANGE 47-63Hz
POWER FACTOR PF>0.95 @ 230VAC/full load,PF>0.90 @ 230VAC/>50% load
TOTAL HARMONIC
DISTORTION		 THD<10% @ 230VAC/full load,THD<15% @ 230VAC/>50% load
EFFICIENCY (Typ.) 90% 90% 89% 90%
STANDBY POWER Note.3 <0.5W @ 230Vac
INPUT CURRENT <0.45A @ 200Vac <0.5A @ 200Vac
INRUSH CURRENT
(Cold start 230Vac)		 <30A,＜0.12A S(Twidth=130us measured at 50% Ipeak) <30A,＜0.14A S(Twidth=158us measured at 50% Ipeak)
Max. No. of PSUs on 16A circuit breaker(230VAC) 26 units( type B);
31units( type C).		 25 units( type B);
27units( type C).
TURN ON DELAY <0.5S @ 230Vac
PROTECTION SHOTR CIRCUIT Hiccup,recovers automatically after fult condition is removed
OVER VOLTAGE 50V 63V 50V
OVER TEMPERATURE Constant current limiting,recovers automatically after fult condition is removed
ENVIROHMENT OPERATION
TEMPERATURE		 ’20—60℃’
OPERATION HUMIDITY 10—90% RH non-condensing
STORAGR TEMPERATURE/HUMIDITY ‘-40—80℃’ 5—95% RH
IP CLASS IP20
VIBRATION 10~500Hz,5G 12min./1cycle,period for 72min. each along X,Y,Z axes
Tc Tc=90℃(Ta=60℃)
MTBF 50000H min.,MIL-HDBK-217F(45℃)
EMC EMC EMISSON Compliance to EN55015,GB17743,EN61000-3-2 Class C(≥50% load),EN61000-3-3
EMC IMMUNITY Note.4 Compliance to EN61000-4-2,3,4,5,6,8,1EN61547,surge：L-N 2.5KV,L/N-PE 2.5KV
SAFETY SAFETY STANDARDS EN61347-1/2-13,GB19510.1/14 EN62384
DALI STANDARDS IEC62386-101,102,207
CERTIFICATE Conform to ENEC CE,SAA,RCM
WITHSTAND VOLTAGE I/P-O/P:3750VAC,I/P-FG:1750VAC,O/P-FG:500VAC
LEAKAGE CURRENT <0.75mA @ 230Vac
Isolation resistance I/P-O/P,I/P-FG,O/P-FG:100MΩ/500Vdc/25℃/70% RH
PACKAGE DIMENSION L355*W30.2*H20.6mm L355*W36.3*H23mm
Carton L415*W330*H190mm L440*W375*H222mm
SINGLE WEIGHT 0.305 Kg 0.355 Kg
PACKING 35PCS/CTN 35PCS/CTN
NET WEIGHT 10.7KG/CTN 12.43KG/CTN
GROSS WEIGHT 12.1KG/CTN 14KG/CTN
Environmental protection RoHS
INPUT CONNECTION PCB connector/3.5mm/6PIN/orange*2+gray*2/0.75mm-1.5mm^2
OUTPUT CONNECTION PCB connector/3.5mm/4PIN/black+green+black+red/0.5-1.5mm^2
NOTE 1.All parameter are measured at 230VAC input,rated load and 25℃ of ambient temperature
2.Ripple & Noise are measured at 20MHz of bandwith by using a 12″ twised pair-wire terminated with a 0.1uF & 47uF paralled capacitor
3.Stand-by power consumption is measured at dimmable off condition.
4.The power supply is considers as a compent that wil be operated in combination with final equipment.Since EMC performance will be affected by the complete installation the final equipment mancfactures must re-quality EMC directive on the complete installation again.
5.When using the power supply, first make sure that the power output and the load are properly connected, and then turn on the AC. Do not connect the AC power before connecting the LED light load.