DR11-75W CONSTANT VOLTAGE LED DRIVER

DR11-75 is a high quality and reliable constant voltage LED driver suitable for indoor and outdoor use. The driver features a toughened case with double insulated primary and secondary VED cables. Wide input voltage with very high efficiency and reliability. Available in 12VDC or 24VDC models

MAIN FEATURES


Input Voltage:90-305VAC
Power CapacityMax 75W
Output VoltageConstant Voltage Output
Output ChannelsSingle Channel
ConnectivityDouble Insulated VED Cable

INPUT SPECIFICATIONS


Input Voltage: Range90-305VAC
Frequency50/60Hz
Typical Power Factor>0.9
Typical Efficiency>93% @ 240VAC

OUTPUT SPECIFICATIONS


Voltage Output Variants12VDC or 24VDC
Max DC Output Current6.3A (12VDC) / 3.1A (24VDC)
Voltage Output ToleranceVoltage Tolerance +/- 0.5%
Rated Power OutputMax 75W
Output ConfigurationSELV

CONTROL CHARACTERISTICS


Power Supply ModeSwitchmode Device
Dimming OptionCompatible with dimming controller*
DALI-2 Version Available By Request

BUILT-IN PROTECTION


Short Circuit & Reverse Polarity Auto Recovery after fault rectified
Over Current ProtectedAuto Recovery after fault rectified
Thermal Overload ProtectionAuto Recovery after fault rectified
Surge Protection>10kV

STANDARDS & COMPLIANCE


Electrical SafetyRCM MARK, EN61347-1, EN61347-2-3
StandardsEN61347-2-13, EN62384
EMC CompliantEN55015 / EN61000-3-2 / EN61000-3-3

PHYSICAL SPECIFICATIONS


Case Dimensions158x69x33.5mm
Working Temperature-10C – +40C
Max Case Temperature80C
Storage Temperature Range-40C – +80C
Withstand VoltageI/P-O/P: 10KVAC
Primary ConnectionPre-fitted AS/NZS Flex & Plug
MTBF>105K hrs min @ 230VAC at full load
IP RatingIP67