DR11-200W CONSTANT VOLTAGE LED DRIVER

DR11-200 is a high quality and reliable constant voltage LED driver suitable for indoor and outdoor use. The driver features atoughened case with double insulated primary and secondary VED cables. Wide input voltage with very high efficiency and reliability. Available in a range of output voltage options.

MAIN FEATURES

Input Voltage 90-305VAC
Power Capacity Max 200W
Output Voltage Constant Voltage Output
Output Channels Single Channel
Connectivity Double Insulated VED Cable

INPUT SPECIFICATIONS

Input Voltage: Range 90-305VAC
Max Surge Voltage 380VAC (2Hr Max)
Typical Power Factor >0.9@60-100%load
Typical Efficiency: >93% @ 240VAC

OUTPUT SPECIFICATIONS

Voltage Output Variants 12VDC / 24VDC / 36VDC / 48VDC
Max DC Output Current 6.3A (12VDC) / 3.1A (24VDC)
Voltage Output Tolerance Voltage Tolerance +/- 0.5%
Rated Power Output Max 200W
Output Configuration SELV

CONTROL CHARACTERISTICS

Power Supply Mode Switchmode Device
Dimming Option Compatible with dimming controller*
DALI-2 Version Available By Request

BUILT-IN PROTECTION

Short Circuit & Reverse Polarity Auto Recovery after fault rectified
Over Current Protected Auto Recovery after fault rectified
Thermal Overload Protection Auto Recovery after fault rectified
Surge Protection Line to ground 10kV, IEC 61000-4-5

STANDARDS & COMPLIANCE

Electrical Safety RCM MARK, EN61347-1, EN61347-2-3
Standards EN61347-2-13, EN62384
EMC Compliant EN55015 / EN61000-3-2 / EN61000-3-3

RCM MARK, EN61347-1, EN61347-2-3

Case Dimensions 201x68x39
Working Temperature -40C – +90C
Max Case Temperature 80C
Storage Temperature Range: -40C – +85C
Primary Connection Pre-fitted AS/NZS Flex & Plug
MTBF >105K hrs min @ 230VAC at full load
IP Rating IP67